DTF & DTG Printing Technology Guide
Përditësuar së fundi:
Direct-to-film vs direct-to-garment: process, durability, cost, and when to use each for B2B apparel programs.
Choosing between DTF (direct-to-film) and DTG (direct-to-garment) affects cost, hand feel, and which fabrics you can use.
Side-by-Side
| Topic | DTF | DTG |
|---|---|---|
| Process | Print on film → powder → heat press | Inkjet directly on garment |
| Fabrics | Cotton, poly, blends, many dark fabrics | Best on cotton / high cotton blends |
| Hand feel | Slightly plastic/film feel | Soft, natural on cotton |
| Durability | Very high when cured well | High with proper pre-treat |
| MOQ economics | Excellent for small/medium | Excellent for small/medium |
| Setup | Low | Low–medium (pre-treat) |
When to Choose DTF
- Mixed fabric catalogs (poly sports + cotton tees)
- Dark garments with fine detail
- Transfers needed for cut pieces or caps
When to Choose DTG
- 100% cotton fashion basics
- Ultra-soft hand demanded by premium retail
- Full-front photographic prints
Process Controls (B2B quality)
| Control | DTF | DTG |
|---|---|---|
| Cure/press | Time–temp–pressure matrix | Cure oven parameters |
| Powder | Particle size, melt quality | N/A |
| Pre-treat | N/A | Spray amount, cure |
| Wash test | 30–50+ cycles target | 30–50+ cycles target |
Cost Drivers
- Art size / ink coverage
- Garment cost & pretreatment
- Labor for press vs automated DTG
- Rework rate if curing is inconsistent
DTF Process — Step by Step
Understanding the production chain explains both the economics and the quality gates of DTF:
- Digital print on PET film — water-based pigment inks (CMYK + white underbase) are printed mirrored onto coated release film.
- Hot-melt powder application — TPU adhesive powder is applied evenly over the wet ink; excess powder is recovered and reused.
- Powder curing / gelling — the printed film passes through a curing unit (flash or oven) to gel the adhesive without fully melting it.
- Transfer pressing — film and garment are pressed together at 150–170°C for 10–15 seconds at medium pressure.
- Cold or warm peel — depending on film type; peel behavior is a primary quality indicator of correct curing.
- Post-press (optional) — a second 2–3 second press smooths the surface and improves wash resistance.
Wash Durability and Acceptance Criteria
For B2B programs, define acceptance before mass production:
- Wash cycles: 30–50 domestic cycles at 40°C with minimal cracking or adhesion loss is a realistic commercial target for both technologies when parameters are controlled.
- Test protocol: 5 pieces per artwork/colorway, washed per ISO 6330 (or agreed method), assessed for crack rating, adhesion loss, and color change.
- Stretch test: DTF transfers on sportswear should survive elongation without edge lifting — a common failure when adhesive is under-applied.
- Hand-feel sign-off: physical approval sample signed by both sides before the run; film feel varies by ink load and powder type.
Program Economics at B2B Volumes
Cost per print is driven by ink coverage and film size more than by quantity — which is why DTF and DTG keep small and medium runs competitive against screen printing (whose setup cost dominates below ~100 pieces per design).
- Below ~50 pieces/design: DTF/DTG are usually the cheapest viable route; no screens, no setup fees.
- 50–500 pieces/design: competitive range; DTF often wins on mixed-fabric programs, DTG on all-cotton fashion lines.
- Above ~500 identical, single-color designs: screen printing becomes cost-competitive on simple artwork — hybrid programs (screen for solids, DTF for detail) are common.
Pre-Press Artwork Requirements
Clean input files prevent most production disputes:
- Vectors preferred (AI/PDF/EPS) for logos and text — they scale to any print size without quality loss.
- Raster artwork at 300 dpi at final print size; PNG with transparent background for DTF, flattened TIFF for DTG.
- Color management: supply Pantone references for brand colors; digital printing renders in CMYK+W, so expect a signed strike-off before the run for critical brand hues.
- White underbase control: on DTF, the white layer defines opacity on dark garments — semi-transparent effects must be specified deliberately, not left to software defaults.
- Placement specs: give measurements from seam (shoulder, chest, back-center) rather than mockup images alone.
FAQ
Is DTF wash-durable enough for workwear?
Yes when cured correctly — common on commercial uniforms.
Can DTG print polyester?
Limited; DTF or sublimation is usually better for high-poly fabrics.
Do you supply only prints or finished garments?
Both models available depending on the program.
What file format?
Vector preferred; PNG 300 dpi with transparent background acceptable.
How to get a costing?
RFQ with garment type, print size, quantity, and wash requirements.
WorldwideTradeX — DTF/DTG RFQ.